COMING SOON
TowNStow Bunkster Kayak Cart with Sand Tires
Now available in a sand tire option. The TowNStow Bunkster Kayak Cart is built from UV-resistant, high-quality, injection-molded polymers and anodized aluminum tubing and assembled with stainless steel hardware. The Bunkster features two fixed uprights configured in the “bunk-style” configuration, where the bars are parallel to the hull of your vessel, which fits many hull shapes of modern-day kayaks. The uprights can easily be repositioned along the axle to maximize compatibility with different kayak widths and body lines of the hull. The axle features six bunk positions ranging from 6.25” to 16” wide.
Tie-Downs and Bunk Pads
Securing a kayak to the Bunkster with straps can be different for every model of kayak, so like the TowNStow BarCart, the Bunkster has an integrated tie-down point located at the center of the axle. The tie-down point is designed for 1” flat webbing cam straps (not included), but you can also use rope with less than 5/16” diameter. One distinct difference you will find from the BeadLoc, hard surface tires is the Sand Tires do not feature the integrated tie down point on the end on the wheel hub. For added grip on the underside of your kayak, the Bunkster includes four super “grippy” rubber bumpers. For long-term durability, we opted for designing snap-on rubber bumpers instead of common foam.
Wheels
Included are two air-filled balloon tires mounted on an injection molded two-piece wheel. The air-filled tires are optimized for various soft surfaces including sand and mud, and yes, they are YakAttack Orange. The wheels feature sealed hubs to keep out sand and grit. Like the BeadLoc wheels, they easily snap in place and are removed by a push of a button, and are interchangeable.
If you are interest in the hard surface tire option of the Bunkster Click HERE
Storage and Components
Many anglers set up their kayaks in the boat ramp parking lot and then cart them to water’s edge, but taking the cart back to their vehicle is not always an option. Doing so leaves your kayak and gear unattended and susceptible to theft. The Bunkster was designed to disassemble completely and without the need for tools. The wheels remove by depressing the button behind the hub on the axle and can be done in seconds. The fixed uprights remove by lifting the orange position detent lever and sliding them off the axle. Everything minus the centralized tie-down point can be removed from the aluminum axle, leaving you with five parts that can be stored in most hatches.
The Bunkster comes with two kickstands, configured with one on each side to optimize and support the loading angle for both sides of the cart. When not in use, the beefy kickstands snap in place, locked out of the way.
- Click HERE for the kayak cart fitment guide
- Click HERE for the Bunkster Quick Start Guide
- Sand Tires are designed for use on soft surfaces like sand or mud
- Tool-less adjustment with no loose parts
- Designed for use with 1” cam straps (straps not included)
- Made from UV-resistant polymers, anodized aluminum, and stainless steel
- Easily adjustable
- 6 adjustable width positions; Max 16”, Min width 6.25”
- Wheels remove by a push of a button
- Integrated tie-down points
- All touch-points are highlighted using orange polymers
- Dual Kick-Away Kick Stands
- Rubber bunk pads
- Quick-release components to quickly stow the cart
- Built for use in harsh marine conditions
- Weight: 11 lbs. 1 oz.
- Wheel size – 14” diameter, 7” wide
- Axle Length: 26.5”
- Weight Capacity 242 lbs.
- Sand Tires Max PSI – 3 lbs.
- Lifetime Warranty on axle and uprights, 6-Month Limited Warranty on Sand Tires
- SKU: TNS-1002-SAND
- UPC: 819731016484
- Patent Pending
WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Overview
Now available in a sand tire option. The TowNStow Bunkster Kayak Cart is built from UV-resistant, high-quality, injection-molded polymers and anodized aluminum tubing and assembled with stainless steel hardware. The Bunkster features two fixed uprights configured in the “bunk-style” configuration, where the bars are parallel to the hull of your vessel, which fits many hull shapes of modern-day kayaks. The uprights can easily be repositioned along the axle to maximize compatibility with different kayak widths and body lines of the hull. The axle features six bunk positions ranging from 6.25” to 16” wide.
Tie-Downs and Bunk Pads
Securing a kayak to the Bunkster with straps can be different for every model of kayak, so like the TowNStow BarCart, the Bunkster has an integrated tie-down point located at the center of the axle. The tie-down point is designed for 1” flat webbing cam straps (not included), but you can also use rope with less than 5/16” diameter. One distinct difference you will find from the BeadLoc, hard surface tires is the Sand Tires do not feature the integrated tie down point on the end on the wheel hub. For added grip on the underside of your kayak, the Bunkster includes four super “grippy” rubber bumpers. For long-term durability, we opted for designing snap-on rubber bumpers instead of common foam.
Wheels
Included are two air-filled balloon tires mounted on an injection molded two-piece wheel. The air-filled tires are optimized for various soft surfaces including sand and mud, and yes, they are YakAttack Orange. The wheels feature sealed hubs to keep out sand and grit. Like the BeadLoc wheels, they easily snap in place and are removed by a push of a button, and are interchangeable.
If you are interest in the hard surface tire option of the Bunkster Click HERE
Storage and Components
Many anglers set up their kayaks in the boat ramp parking lot and then cart them to water’s edge, but taking the cart back to their vehicle is not always an option. Doing so leaves your kayak and gear unattended and susceptible to theft. The Bunkster was designed to disassemble completely and without the need for tools. The wheels remove by depressing the button behind the hub on the axle and can be done in seconds. The fixed uprights remove by lifting the orange position detent lever and sliding them off the axle. Everything minus the centralized tie-down point can be removed from the aluminum axle, leaving you with five parts that can be stored in most hatches.
The Bunkster comes with two kickstands, configured with one on each side to optimize and support the loading angle for both sides of the cart. When not in use, the beefy kickstands snap in place, locked out of the way.
- Click HERE for the kayak cart fitment guide
- Click HERE for the Bunkster Quick Start Guide
- Sand Tires are designed for use on soft surfaces like sand or mud
- Tool-less adjustment with no loose parts
- Designed for use with 1” cam straps (straps not included)
- Made from UV-resistant polymers, anodized aluminum, and stainless steel
- Easily adjustable
- 6 adjustable width positions; Max 16”, Min width 6.25”
- Wheels remove by a push of a button
- Integrated tie-down points
- All touch-points are highlighted using orange polymers
- Dual Kick-Away Kick Stands
- Rubber bunk pads
- Quick-release components to quickly stow the cart
- Built for use in harsh marine conditions
- Weight: 11 lbs. 1 oz.
- Wheel size – 14” diameter, 7” wide
- Axle Length: 26.5”
- Weight Capacity 242 lbs.
- Sand Tires Max PSI – 3 lbs.
- Lifetime Warranty on axle and uprights, 6-Month Limited Warranty on Sand Tires
- SKU: TNS-1002-SAND
- UPC: 819731016484
- Patent Pending
WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Overview
Now available in a sand tire option. The TowNStow Bunkster Kayak Cart is built from UV-resistant, high-quality, injection-molded polymers and anodized aluminum tubing and assembled with stainless steel hardware. The Bunkster features two fixed uprights configured in the “bunk-style” configuration, where the bars are parallel to the hull of your vessel, which fits many hull shapes of modern-day kayaks. The uprights can easily be repositioned along the axle to maximize compatibility with different kayak widths and body lines of the hull. The axle features six bunk positions ranging from 6.25” to 16” wide.
Tie-Downs and Bunk Pads
Securing a kayak to the Bunkster with straps can be different for every model of kayak, so like the TowNStow BarCart, the Bunkster has an integrated tie-down point located at the center of the axle. The tie-down point is designed for 1” flat webbing cam straps (not included), but you can also use rope with less than 5/16” diameter. One distinct difference you will find from the BeadLoc, hard surface tires is the Sand Tires do not feature the integrated tie down point on the end on the wheel hub. For added grip on the underside of your kayak, the Bunkster includes four super “grippy” rubber bumpers. For long-term durability, we opted for designing snap-on rubber bumpers instead of common foam.
Wheels
Included are two air-filled balloon tires mounted on an injection molded two-piece wheel. The air-filled tires are optimized for various soft surfaces including sand and mud, and yes, they are YakAttack Orange. The wheels feature sealed hubs to keep out sand and grit. Like the BeadLoc wheels, they easily snap in place and are removed by a push of a button, and are interchangeable.
If you are interest in the hard surface tire option of the Bunkster Click HERE
Storage and Components
Many anglers set up their kayaks in the boat ramp parking lot and then cart them to water’s edge, but taking the cart back to their vehicle is not always an option. Doing so leaves your kayak and gear unattended and susceptible to theft. The Bunkster was designed to disassemble completely and without the need for tools. The wheels remove by depressing the button behind the hub on the axle and can be done in seconds. The fixed uprights remove by lifting the orange position detent lever and sliding them off the axle. Everything minus the centralized tie-down point can be removed from the aluminum axle, leaving you with five parts that can be stored in most hatches.
The Bunkster comes with two kickstands, configured with one on each side to optimize and support the loading angle for both sides of the cart. When not in use, the beefy kickstands snap in place, locked out of the way.
- Click HERE for the kayak cart fitment guide
- Click HERE for the Bunkster Quick Start Guide
- Sand Tires are designed for use on soft surfaces like sand or mud
- Tool-less adjustment with no loose parts
- Designed for use with 1” cam straps (straps not included)
- Made from UV-resistant polymers, anodized aluminum, and stainless steel
- Easily adjustable
- 6 adjustable width positions; Max 16”, Min width 6.25”
- Wheels remove by a push of a button
- Integrated tie-down points
- All touch-points are highlighted using orange polymers
- Dual Kick-Away Kick Stands
- Rubber bunk pads
- Quick-release components to quickly stow the cart
- Built for use in harsh marine conditions
- Weight: 11 lbs. 1 oz.
- Wheel size – 14” diameter, 7” wide
- Axle Length: 26.5”
- Weight Capacity 242 lbs.
- Sand Tires Max PSI – 3 lbs.
- Lifetime Warranty on axle and uprights, 6-Month Limited Warranty on Sand Tires
- SKU: TNS-1002-SAND
- UPC: 819731016484
- Patent Pending
WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
TowNStow Bunkster Kayak Cart with Sand Tires
SKU: TNS-1002-SAND
Find in stores near you!
Bundled Products
Overview
Now available in a sand tire option. The TowNStow Bunkster Kayak Cart is built from UV-resistant, high-quality, injection-molded polymers and anodized aluminum tubing and assembled with stainless steel hardware. The Bunkster features two fixed uprights configured in the “bunk-style” configuration, where the bars are parallel to the hull of your vessel, which fits many hull shapes of modern-day kayaks. The uprights can easily be repositioned along the axle to maximize compatibility with different kayak widths and body lines of the hull. The axle features six bunk positions ranging from 6.25” to 16” wide.
Tie-Downs and Bunk Pads
Securing a kayak to the Bunkster with straps can be different for every model of kayak, so like the TowNStow BarCart, the Bunkster has an integrated tie-down point located at the center of the axle. The tie-down point is designed for 1” flat webbing cam straps (not included), but you can also use rope with less than 5/16” diameter. One distinct difference you will find from the BeadLoc, hard surface tires is the Sand Tires do not feature the integrated tie down point on the end on the wheel hub. For added grip on the underside of your kayak, the Bunkster includes four super “grippy” rubber bumpers. For long-term durability, we opted for designing snap-on rubber bumpers instead of common foam.
Wheels
Included are two air-filled balloon tires mounted on an injection molded two-piece wheel. The air-filled tires are optimized for various soft surfaces including sand and mud, and yes, they are YakAttack Orange. The wheels feature sealed hubs to keep out sand and grit. Like the BeadLoc wheels, they easily snap in place and are removed by a push of a button, and are interchangeable.
If you are interest in the hard surface tire option of the Bunkster Click HERE
Storage and Components
Many anglers set up their kayaks in the boat ramp parking lot and then cart them to water’s edge, but taking the cart back to their vehicle is not always an option. Doing so leaves your kayak and gear unattended and susceptible to theft. The Bunkster was designed to disassemble completely and without the need for tools. The wheels remove by depressing the button behind the hub on the axle and can be done in seconds. The fixed uprights remove by lifting the orange position detent lever and sliding them off the axle. Everything minus the centralized tie-down point can be removed from the aluminum axle, leaving you with five parts that can be stored in most hatches.
The Bunkster comes with two kickstands, configured with one on each side to optimize and support the loading angle for both sides of the cart. When not in use, the beefy kickstands snap in place, locked out of the way.
- Click HERE for the kayak cart fitment guide
- Click HERE for the Bunkster Quick Start Guide
- Sand Tires are designed for use on soft surfaces like sand or mud
- Tool-less adjustment with no loose parts
- Designed for use with 1” cam straps (straps not included)
- Made from UV-resistant polymers, anodized aluminum, and stainless steel
- Easily adjustable
- 6 adjustable width positions; Max 16”, Min width 6.25”
- Wheels remove by a push of a button
- Integrated tie-down points
- All touch-points are highlighted using orange polymers
- Dual Kick-Away Kick Stands
- Rubber bunk pads
- Quick-release components to quickly stow the cart
- Built for use in harsh marine conditions
- Weight: 11 lbs. 1 oz.
- Wheel size – 14” diameter, 7” wide
- Axle Length: 26.5”
- Weight Capacity 242 lbs.
- Sand Tires Max PSI – 3 lbs.
- Lifetime Warranty on axle and uprights, 6-Month Limited Warranty on Sand Tires
- SKU: TNS-1002-SAND
- UPC: 819731016484
- Patent Pending
WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
