After releasing the TracPak back in September of 2023, we knew it was time to continually improve the system and create a few purpose-built accessories so kayakers and anglers could customize the system depending on their specific needs. This is the first round of accessories with more to come.
TracPak Trays
Sold as a two pack, these trays are a simple way to "Make It Yours" and customize your TracPak Stackable Storage Box so it fits your specific needs. From tools to tackle and anything in between, these trays provide heighten organization, making your time in the outdoors more efficient. We have three different trays with 3, 5, and 8 compartments. The trays are half depth meaning they only take up half the height of the internal space of the TracPak, so a single TracPak can hold up to two trays. Included are ten Stacking Tabs. When used these Stacking Tabs create the ability for a single tray to be suspended within the TracPak leaving the bottom open for miscellaneous storage of larger items. When the TracPak is closed a suspended half-depth tray comes in contact with the underside of the lid keeping items secure in each compartment of the tray.
1x3 TracPak Tray
5x1 TracPak Tray
4x2 TracPak Tray
7.5" GridLoc PicPocket
The 7.5” GridLoc PicPocket works with the BlackPak Pro as an external storage pocket or is used to convert the TracPak into the TracPak with PicPocket QuickDraw. This kit includes all necessary hardware for both installs. Internal dimensions: 7” wide x 2.25” deep.
For use as a BlackPak accessory: The 7.5” PicPocket is compatible with the GridLoc Hole Pattern found on the BlackPak Pro so no drilling is required for installation. Please note, this does not fit 3600 sized tackle boxes.
For use as a TrackPak upgrade: This kit is used to convert the standard TracPak into the TracPak with PicPocket QuickDraw and includes all of the necessary hardware and bungee. When installed, this kit will prop the TracPak lid open at a 30° angle, fully exposing the PicPocket. This works exceptionally well when the TrackPak is mounted on a vertical surface like the side of the BlackPak Pro. It will also work when mounted horizontally on a GearTrac.
Quick Release Handle
Since the release of the TracPak Stackable Storage Box, anglers have been able to take a different approach to the way they prep gear for a trip. Organizing several TracPaks the night before, optimizes your time spent on the water. Transporting a stack of TracPaks from home, to your vehicle, and then to your watercraft just got a lot easier.
Designed for use with the TracPak Stackable Storage Box, the Quick Release Handle attaches to the lid of the TracPak and provides a quick and easy carry handle for one or multiple TracPak stackable storage boxes. The handle snaps into the Quick Release tabs on the TracPak lid the same way multiple storage boxes are attached. To remove the handle simply, depress the built-in tab on the TracPak lid and the handle will release. No extra hardware or loose parts are needed for the installation.
TracPak with PicPocket QuickDraw
The TracPak with PicPocket QuickDraw is a variation of the TracPak Stackable Storage Box combined with the 7.5” GridLoc PicPocket. When combined these products create an easy access storage option with a spring-loaded lid for anything from tools to tackle. The interior storage space is 7” wide x 2.25” deep. When the TracPak latch is opened, the lid pops out at a 30° angle, fully exposing the PicPocket. This works exceptionally well when the TrackPak is mounted on a vertical surface like the side of the BlackPak Pro but can also be mounted horizontally on a GearTrac. Includes the TracPak Quick Release Base and the necessary hardware to mount the TracPak to GearTrac or on the BlackPak Pro.
Fully Loaded TracPak Combo Kit
This kit includes everything that comes with the standard TracPak Combo Kit with the addition of the Quick Release Handle and three interior storage trays. If you are looking for the TracPak kit that is ready to hit the water and store anything from tools to tackle the Fully Loaded kit is the way to go.
TracPak Cutting Board Attachment
The TracPak Cutting Board Attachment gives you a hard working surface that you can use right in front of you or anywhere you have your TracPak mounted. The TracPak Cutting Board is made from food safe HDPE and works great as a bait cutting surface or even lunch. The cutting boards design allows you to easily attach and remove it utilizing the stacking tabs found on the lid of any TracPak.
