The GridLoc PicPocket is a 7.5 inch wide storage bin designed to fit the GridLoc pattern featured on the BlackPak Pro, and can be attached to the inside or the outside. However, in true YakAttack fashion, it has another use. The PicPocket can be installed on the lid of the TracPak, converting it into the TracPak PicPocket QuickDraw. Follow along in this blog and we will show you both uses and include videos showing you how it's done.
The 7.5” PicPocket is compatible with the GridLoc Hole Pattern found on the BlackPak Pro so no drilling is required for this installation. Simply line up the PicPocket with the screw boses on the GridLoc pattern and use the four included stainless steel screws to attach it. Please note, the PicPocket bin does not fit 3600 sized tackle boxes. The internal dimensions are 7” wide x 2.25” deep.
7.5" PicPocket Shown on the 16" Side of a BlackPak Pro
7.5" PicPocket Shown on the 13" Side of a BlackPak Pro
Below is a full, walk through video showing you how to attach the PicPocket to your BlackPak Pro.
The PicPocket can also be used to convert the standard TracPak Stackable Storage Box into the TracPak with PicPocket QuickDraw and includes all of the necessary hardware and bungee. When installed,this kit creates an easy access storage option with a spring-loaded lid for anything from tools to tackle. This will prop the TracPak lid open at a 30° angle, fully exposing the PicPocket inside. It works exceptionally well when the TrackPak is mounted on a vertical surface like the side of the BlackPak Pro. It will also work when mounted horizontally on a GearTrac. If you don't have an existing TracPak, we do sell this fully assembled. Click HERE for the assembled version.
Vertical Orientation
Horizontal Orientation
Below is a full, walk through video showing you how to attach the PicPocket to your TracPak Stackable Storage Box, converting it into the TracPak with PicPocket QuickDraw.